Shown with system 100+ 150g flat back sinker - available separately
| Line |
1200mm |
60lb |
| Snoods |
350mm |
25lb |
| Hooks |
Aberdeen |
#1 |
| Available as: |
Genie® Ready Rig |
|
The Genie Three Hook Flapper is based on the traditional rig design and features and adjustable bottom snood. This is an ideal rig for flatties.
(Although not shown, optional stand off sleeves are supplied).
Optional silicine stand off's included. Sinker not included.
To Make this Rig
For the rig body, you will need;
2 x Genie Link Clips
5x Genie Mini-Crimps
6 x Genie 3mm Beads
3 x Genie 45lb Snood Swivels
4 x Genie Mini-Crimp
2 x 6mm length of Genie 1.5mm silicone tubing.
1 x approx. 1800mm length 60lb
main line (for 1200mm body)
You will also need;
3 x 350mm snood
The Rig Body
1. Tie on the bottom Genie Link Clip and thread on the rest of the components in this order.
| |
lower ass'y |
middle ass'y |
upper ass'y |
| |
|
|
crimp |
3mm bead swivel |
3mm bead |
3mm bead |
3mm bead |
swivel |
swivel |
sliding stop knot |
3mm bead |
3mm bead |
crimp |
crimp |
crimp |
4. Clip the snoods onto the 45lb snood swivels.
5. Position the top mini-crimp just below the Genie Link Clip and secure. Position the second mini-crimp, with snood assembly, below the first and, ensuring the eye of the snood swivel is tightly entrapped between the two 3mm beads secure.
6. Position the next mini-crimp approx. 360mm below 1st snood assembly and secure. with the next mini crimp, tightly trap the second snood swivels between the 3mm beads and secure.
7. Position the remaining mini-crimp approx. 360mm below 2nd snood assembly and secure. Ensuring the eye of the snood swivel is tightly entrapped between the 3mm beads by the stop knots, and position the snood assembly anywhere in the lower third section.
|