Shown with system 100+ 150g flat back sinker - available separately
| Line |
830mm |
60lb |
| Snood |
700mm |
25lb |
| Hook |
Viking |
# 2/0 |
| Available as: |
Genie® Ready Rig |
| |
Genie® Ready Rig Ultra! |
|
An up & over running ledger rig similar to the R014 but includes a 150mm clipped up bppm, to help avoid tangles upon retrieval.
Sinker not included.
To Make this Rig
For the rig body, you will need;
1 x Genie Link Clip
2 x Genie mini-Crimp
2 x Genie 3mm Beads
1 x SRT Pulley Clip
1 x SRT Spring
1 x ABC Link Clip
2 x
Genie 4mm Power Beads
1 x 150mm Genie Handi-tube boom
1 x Genie 80lb Main Line Swivel
1 x
approx. 1130mm length 60lb
main line (for 830mm body)
You will also need;
1 x 700mm snood
The Rig Body
1. Tie on the 80lb main line swivel and thread on the rest of the components in this order.
| |
4mm power bead |
spring |
handi-tube boom |
3mm bead |
4mm power bead |
SRT Clip |
AC Link Clip |
3mm bead |
| |
Slider |
crimp |
| |
crimp |
|
2. Tie on the top Genie Link Clip, ensuring the line is approx. 830mm long.
3. Hang the rig from a peg by the top Genie Link Clip and attach a sinker onto the free running Genie ABC Link Clip.
4. Locate the ABC bait clip in the slider and attach the snood to the main line swivel.
5. Locate the hook in the bait clip and lay the snood line through the pulley clip.
6.Hold the sinker down firmly and, with a pair of pliers, push the crimp that is under the spring assembly up the main line until the spring is 2/3 compressed and secure it.
7. Release the hook, and with the crimp above the assembly, compress until the spring is 3/4 of its original length and secure.
|