Shown with system 100+ 150g flat back sinker - available separately
| Line |
1000mm |
60lb |
| Snoods |
700mm |
25lb |
| Hooks |
Viking |
# 2/0 |
| Available as: |
Genie® Ready Rig |
| |
Genie® Ready Rig Ultra! |
|
Same as the R015, but with an additional snood giving a one up/one down design ( a clipped down snood together with a clipped up running boom ledger) presenting two baits over a wide area.
Sinker not included.
To Make this Rig
For the rig body, you will need;
1 x Genie Link Clip
1 x Genie 45lb swivel
2 x SRT Spring
4 x Genie 3mm Bead
1 x SRT Pulley Clip
1 x ABC Link Clip (with slider)
2 x
Genie 4mm Power Beads
1 x 150mm Genie Handi-tube boom
1 x Genie 80lb Main Line Swivel
1 x
approx. 1300mm length 60lb
main line (for 1000mm body)
You will also need;
2 x 700mm snood
The Rig Body
1. Tie on the 80lb main line swivel and thread on the rest of the components in this order.
| |
|
|
crimp |
Bead |
crimp |
crimp |
handi-tube boom |
spring |
spring |
4mm Power |
3mm bead |
3mm bead |
Bead |
SRT Clip |
45lb swivel |
| |
ABC Link Clip |
3mm Bead |
3mm Bead |
2. Tie on the top Genie Link Clip, ensuring the line is approx. 830mm long.
3. Hang the rig from a peg by the top Genie Link Clip and attach a sinker onto the free running Genie ABC Link Clip.
4. Locate the ABC bait clip in the slider and attach the snood to the main line swivel.
5. Locate the hook in the bait clip and lay the snood line through the pulley clip.
6. Hold the sinker down firmly and, with a pair of pliers, push the crimp that is under the spring assembly up the main line until the spring is 2/3 compressed and secure it.
7. Release the hook, and with the crimp above the assembly, compress until the spring is 3/4 of its original length and secure.
8. Attach the upper snood to the 45lb swivel and locate the hook in the bait clip.
9. Hold the sinker down firmly and, with a pair of pliers, push the crimp that is under the spring assembly up the main line until the spring is 2/3 compressed and secure it.
|