Shown with system 100+ 150g flat back sinker - available separately

To Make this Rig
For the rig body, you will need;
1 x Genie Link Clip
6 x Genie Mini-Crimps
6 x Genie 3m Beads
3 x Gene SRT Springs
1 x ABC Link Clip
1 x Genie 100mm Clip Down Boom
2 x Genie 100mm Clip Down Boom with bait clips
1 x approx. 1500mm length 60lb main line (for 1200mm body)

You will also need;
3 x250mm snood


The Rig Body

1. Attach the bait clip to the ABC Link Clip, tie the clip onto your line and thread on the rest of the components in this order.

2. Tie on the top Genie Link Clip, ensuring the main line is at 1200mm.

3. Hang the rig from a peg, attach a sinker and locate the ABC clip in the slider.

4. Clip the lower snood onto the lower boom and locate the hook in the bait clip.

5. Hold the sinker down firmly and, with a pair of pliers, push the crimp that is under the spring assembly up the main line until the spring is 2/3 compressed and secure it.

6. Let go of the sinker whilst ensuring the hook remains in the bait clip, which will allow the spring to slightly de-compress. Allow the top bead to rest on the boom and without compressing the spring further, secure the top crimp immediately above the bead (this will ensure enough pressure on the boom to hold it out.)

7. Repeat steps 4, 5 & 6 for the remaining snoods, using the bait clips on the booms.