| Line |
830mm |
60lb |
| Snoods |
250mm |
25lb |
| (with
100mm boom giving a combined reach of 350mm.) |
| Hooks |
Aberdeen |
#
1 |
| Available as: |
Genie® Ready Rig |
| |
Genie® Ready Rig Ultra! |
|
The
clip down booms on this two hook paternoster give
a virtually tangle free rig that is also excellent
for distance
casting - for use from the beach and ideal for estuary
fishing!
Sinker not included.
To Make this Rig
For the rig body, you will need;
1 x Genie Link Clips
4 x Genie Mini-Crimps
4 x Genie 3mm Beads
2 x Genie SRT Springs
1 x Genie ABC Link Clip
1 x Genie 100mm Clip Down Boom
1 x Genie 100mm Clip Down Boom
with bait clip
1 x approx. 1130mm length 60lb
main line (for 830mm body)
You will also need;
2 x 250mm snood
The Rig Body
1. Attach the bait clip to the ABC Link Clip, tie the
clip onto your line and thread on the rest of the components
in this order;
| |
lower snood
slider
crimp
Spring
3mm bead
boom with bait clip
3mm bead
crimp
|
upper snood
crimp
Spring
3mm bead
boom
3mm bead
crimp
|
2. Tie on the top Genie Link Clip, ensuringthe main
line is at 830mm.
3. Hang the rig from a peg, attach a sinker
and locate
the ABC clip in the slider
4. Clip the lower snood onto the lower boom and locate
the hook in the bait clip.
5. Hold the sinker down firmly and, with a pair of
pliers, push the crimp that is under the lower spring
assembly up the main line until the spring is fully
compressed and secure it.
6. Let go of the sinker whilst ensuring the hook
remains in the bait clip, which will allow the spring
to slightly de-compress. Allow the top bead to rest
on the boom and without compressing the spring further,
secure the top crimp immediately above
the bead (This will ensure enough pressure on the
boom to hold it out.)
7. Repeat steps 4, 5 & 6 for the remaining snood,
using the bait clips on the lower boom.
|