| Line |
830mm |
60lb |
| Snoods |
500mm |
25lb |
| (
boom giving a combined reach of 700mm.) |
| Hooks |
Viking |
#
1 |
| Available as: |
Genie® Ready Rig |
| |
Genie® Ready Rig Ultra! |
|
The
clip down boom on this single hook clip down gives
a virtually tangle free rig that is also excellent
for distance casting.
Sinker not included.
To Make this Rig
For the rig body, you will need;
1 x Genie Link Clip
2 x Genie Mini-Crimp
2 x Genie 3mm Bead
1 x Genie SRT Spring
1 x Genie 200mm Boom
1 x Genie ABC Link Clip
1 x approx. 1130mm length 60lb
main line (for 830mm body)
You will also need;
1 x 500mm
snood
The Rig Body
1. Attach the bait clip to the
ABC Link Clip, tie the clip onto your line and thread
on the rest of the components in this order.
| |
slider
crimp
spring
3mm bead
|
|
2. Tie on
the top Genie Link Clip, ensuring the main line is
at 830mm.
3. Hang the rig from a peg, attach a sinker and locate
the ABC clip in the slider
4. Clip the snood onto the boom.
5. Hold the sinker down firmly and, with a pair of
pliers, push the crimp that is under the lower spring
assembly up the main line until the spring is fully
compressed and secure it.
6. Let go of the sinker whilst ensuring the hook
remains in the bait clip, which will allow the spring
to slightly decompress. Allow the top bead to rest
on the boom and without compressing the spring further,
secure the top crimp immediately above the bead (This
will ensure enough pressure on the boom to hold it
out.)
|